LC-125-B Battery Lube Pump

Lube-care LC-125-B Battery unit, external thread M16, internal thread M10x1, without lubricant cartridge and battery.

We offer the single-point lubrication system as a battery version for 4.5V, with a 24 V DC connection or an interface for a PLC control. The LC-125-B can be used as a lubricator or also as a multi-point lubrication system in combination with progressive distributors or electromechanical distributors. Cartridges with 125 ml capacity are provided for the LC-125-B.

SKU: LC-125-B Category: Tags: , ,

LC-125-B Battery Pump Automatic Lubricator

for direct supply of one lubrication point

The Lube Care LC-125-B is a highly efficient, microprocessor-controlled single-point lubricator. The power supply for the LC-125-B is provided by a 4,5 V battery pack. The lubricator is suitable for the accurate and demand-oriented direct supply of grease or oil of one lubrication point. Due to the high operating pressure of up to 30 bar (435 psi), the LC-125-B can also be used in combination with progressive lubricant distributors to supply several lubrication points.

The following operating modes can be flexibly set on the LC-125-B:
  • Hour-Mode -h- (setting of a pause time between two lubrication cycles and setting of the number of cycles during a dispensing cycle)
  • Empty-Time-Mode Et (setting of an emptying time in months)

The lubricator can optionally be equipped with an M12x1 connector as a connection for a LED cable. This enables remote monitoring of the lubricator in addition to the display.

Lubricants:
  • Greases up to NLGI class 2
  • Oils up to 30,000 mm²/s
Applications:
  • Rolling and plain bearing lubrication
  • Linear guides
  • Ball screws
  • Racks and pinions
  • Chains
Features
Hour-Mode -h-: Pause time 1 – 99 h Number of cycles 1 – 10
Empty-Time-Mode Et: Emptying time 1 – 24 months
External connection: depending on version
Pressure monitoring: included
Empty level warning: included
Technical specifications
Power supply: 4,5 V
Number of outlets: 1
Operating temperature: min. – 15 °C (Lithium) min. +15 °C (Alkaline) max. + 70 °C
Maximum output pressure: 30 bar (435 psi)
Protection class: IP54
Volume per dispensing stroke: 0,15 cm³
Cartridge volume: 125 ml
Outlet connection: External thread M16x1,5, Internal thread M10x1
Mounting position: upright
Weight: approx. 365 g
Dimensions W, H, D: 83 x 149 x 85 mm
Lube-Care 125-B Type

Lube-care 125-B1 : Battery unit, external thread M16, internal thread M10x1, without lubricant cartridge and battery, Lube-care 125-B1L : Battery unit, external thread M16, internal thread M10x1, with M12x1 – Plug for LED cable, without lubricant cartridge, without battery