LC-250-C1 Automatic Lubricator
for the direct supply of one lubrication point
The Lube Care LC-250-C1 is a highly efficient, microprocessor-controlled lubricator. The power supply for the LC-250-C1 is 24 VDC using an M12x1 connector. The lubricator is suitable for the accurate and demand-oriented direct supply of one lubrication point with grease or oil. Due to the high operating pressure of up to 70 bar (1015 psi), the LC-250-C1 can also be used in combination with progressive lubricant distributors to supply several lubrication points.
The following operating modes can be flexibly set on the LC-250-C1:
- Hour-Mode -h- (setting of a pause time between two lubrication cycles and setting of the number of cycles during a dispensing cycle)
- Empty-Time-Mode Et (setting of an emptying time in months)
- Pulse-Mode PUL (control of the Lube-Care via TriboServ LC-Control or PLC)
Lubricants:
- Greases up to NLGI class 2
- Oils up to 30,000 mm²/s
Applications:
- Rolling and plain bearing lubrication
- Linear guides
- Ball screws
- Racks and pinions
- Chains
Features
Hour-Mode -h-: Pause time 1 – 99 h Number of cycles 1 – 10
Empty-Time-Mode Et: Emptying time 1 – 24 months
External connection: included
Pressure monitoring: included
Empty level warning: included
Technical specifications
Power supply: +24 VDC
Connection plug: M12x1 4 pole, A-coding
Number of outlets: 1
Maximum output pressure: 30 bar (435 psi)
Protection class: IP54
Volume per dispensing stroke: 0,15 cm³
Cartridge volume:
– 125 ml (Standard Cartridge)
– 250 ml (optional)
Outlet connection: External thread M16x1,5, Internal thread M10x1
Mounting position: upright
Weight: approx. 365 g
Dimensions W, H, D:
– 83 x 149 x 85 mm (125ml cartridge)
– 83 x 185 x 85 mm (250ml cartridge)
